Aluminum Farm Mounting System

LARGE Solar Farm Ground Mounting System is suitable for farmland with ground screw.the solar panel can be installed at special angle and leaving some gap each other for the sunshine.

LARGE Thin Film Solar Panel Clamps are used for framess solar panel, The thickness range of PV module is from 4mm to 10.5mm

The LARGE ZAM Steel Ground mounting system has been developed as a universal PV module, mounting system for open space ground installations. The system is composed of Zn-Al-Mg coated U steel support pipe, U steel rails, and the special modules with U rails, U rail connecter, triangle fitting, ground screws, and a high degree of pre-assembly, easy and quick to save your labor cost and time. The customized length can eliminate the weld and cut onsite to keep the high anticorrosive performance, the structural strength, and the appearance. LARGE Energy ZAM Steel Ground mounting rails adopt ZAM coated steel, with a surface coated thickness of more than 275g/m2. The coated thickness applied complies with GB/T 2518-2019.product to be anti-corrosive, anti-rust. Every bolt and nut.

LARGE roof rails and ground rails are made of strength extrusion aluminum alloy 6005-T5 ,which can be used for solar panel installation.our standard length is 4200mm and 2100mm,or also can be made as per your request.

LARGE  Hanger Bolt with L foot are used for tin roof and tile roof mounting the hanger bolt's length are M10X200mm; M10X250mm & M10X300mm,for the roof, customized are available.

LARGE Solar Cable Clips is widely used in solar panel array cable positioning.to help prevent damage of the cable insulation.

LARGE Adjustable Tilt Roof System is engineered for the maximum flexibility possible in designing and planning for the commercial and residential roof solar system. It is applicable to install the usual framed module, The solar system can be a fixed angle or adjustable such as 10~15 degree, 15~30 degree,30~60degree and The special extruded aluminum rail, special module, clamp kit and the Adjustable Front/Rear Leg Kits can be high pre-assembly and make the installation easy and quick to save your labor cost and time. The customized length can eliminate the weld and cut onsite to keep the high anticorrosive performance, the structure strength and the appearance.

LARGE roof rails splice kits are made of strength extrusion aluminum alloy 6005-T5 ,which can be used for solar panel installation.our standard length is 120mm and 140mm,or also can be made as per your request.

LARGE Solar Panel End Clamps 30/35 are made of strength extrusion aluminum alloy 6005-T5 ,which can be used for solar panel installation with the thickness 25~50mm of solar modules. It is pre-assembled by different length of SUS304 screws and aluminum D module nuts to meet your solar panel's requirement.