Alumiunm Solar Ground Mounting System

LARGE Aluminum Ground Mounting System is suitable for open ground,which can be used for ground screw foundation.the high pre-assembly of legs and support bar,it's easy and quick to save your labor cost and time.

Brand:
LARGE
Item No.:
LA-ALGM
Payment:
T/T or LC
Product origin:
Xiamen China
Color:
Natural or customized.
Shipping port:
Xiamen Port,China
Lead Time:
10 work days after receipt of deposit
Installation Site:
Ground Screw & Concrete Foundation
Raw Material:
Aluminum Alloy 6005-T5
Surface Treatment:
Anodized
Wind Load:
Upto 60m/s
Snow Load:
Upto 1.5KN/m2
Standard Compliance:
AS/NZS1170.2 ; SGS and CE Certification.

Product Details

Aluminum Solar Ground Mounting System

The LARGE AL-Ground mounting system has been developed as a universal PV modules, mounting system for open space ground installations. The system composed with strong ground rails , the special “D” modules, support pipe, H connector ,ground base, ground screws and the high degree of pre-assembly easy and quick to save your labor cost and time. The customized length can eliminate the weld and cut onsite to keep the high anticorrosive performance, the structure strength and the appearance.

Technical Parameters :

Installation Site: Ground Screw and Concrete Foundation

Installation Angle: Customized.

Wind Load: Upto 60m/s

Snow Load: Upto 1.5KN/m²

Applicable Module: Framed or Frameless

Module Orientation: Landscape and Portrait

Module Dimension: Applicable to any dimension

Standard Compliance: AS/NZS1170.2 ; SGS and CE Certification.

Material: Aluminum Alloy 6005-T5

Color: Natural or customized.

Warranty: 12 years of quality warranty and 20 years service life

Installation Guide :

Step 1: As per the installation layout,using the special facility to put the ground screw into the open ground.

Step 2: Fix the ground base onto the ground screw plate with 2pcs M12*35mm bolts and M12 nuts.

Step 3: Unfold the Pre-assambly support pipe kits(with H connector and legs) and put the front and back legs into ground base with M10*90mm bolts and nuts.

Step 4: Install the enforcement tubes on the front and back legs with M10*90mm bolts and nuts.

Step 5: Install the AR rail onto the support pipe with rail clamps and D module nuts.

Step 6: Put the solar panels on the rails ,and fix the panel with Mid clamps,End clamps and D module nut.

Solar mounting rack 1MW

Components List :

Solar tracking system

Hot Tags :

Open field mount racking Ground screw for ground Ground mounting system Solar ground mounting bracket Ground mount MW Ground screw ground racking bracket Solar module ground mounting bracket Solar ground mounting rack systems

Previous :
Zn-Al-Mg Steel Ground Mounting System
Next :
Galvanized Steel Ground Mounting System

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Subject : Alumiunm Solar Ground Mounting System

Categories

New Products

related products

Galvanized Steel Ground Mounting System

LARGE Galvanized Steel Ground Mounting System is suitable for open ground,which can be used for both concrete foundation and ground screw.The ground mounting system with galvanized steel structure. has large application on the ground.

Zn-Al-Mg Steel Ground Mounting System

The LARGE ZAM Steel Ground mounting system has been developed as a universal PV module, mounting system for open space ground installations. The system is composed of Zn-Al-Mg coated U steel support pipe, U steel rails, and the special modules with U rails, U rail connecter, triangle fitting, ground screws, and a high degree of pre-assembly, easy and quick to save your labor cost and time. The customized length can eliminate the weld and cut onsite to keep the high anticorrosive performance, the structural strength, and the appearance. LARGE Energy ZAM Steel Ground mounting rails adopt ZAM coated steel, with a surface coated thickness of more than 275g/m2. The coated thickness applied complies with GB/T 2518-2019.product to be anti-corrosive, anti-rust. Every bolt and nut.

Solar Adjustable Tilt Bracket

LARGE Adjustable Tilt Roof System is engineered for the maximum flexibility possible in designing and planning for the commercial and residential roof solar system. It is applicable to install the usual framed module, The solar system can be a fixed angle or adjustable such as 10~15 degree, 15~30 degree,30~60degree and The special extruded aluminum rail, special module, clamp kit and the Adjustable Front/Rear Leg Kits can be high pre-assembly and make the installation easy and quick to save your labor cost and time. The customized length can eliminate the weld and cut onsite to keep the high anticorrosive performance, the structure strength and the appearance.

Solar Metal Roof Hooks

LARGE Metal Roof clamp hooks are suitable for lots of tin rooftop, such as Trapezoid tin roof,Klip Lok 406 tin roof, Klip Lok 700 tin roof...

Galvanized Steel Ground Mounting System

Solar Corner Mounts For Single PV Panel

LARGE ABS corners bracket are used for rooftop,RV,yachts, toring cars,boats,caravans,etc.

Solar Rail Splice

LARGE roof rails splice kits are made of strength extrusion aluminum alloy 6005-T5 ,which can be used for solar panel installation.our standard length is 120mm and 140mm,or also can be made as per your request.

Solar Clamps For 30 and 35 Panel

LARGE Solar Panel End Clamps 30/35 are made of strength extrusion aluminum alloy 6005-T5 ,which can be used for solar panel installation with the thickness 25~50mm of solar modules. It is pre-assembled by different length of SUS304 screws and aluminum D module nuts to meet your solar panel's requirement.

Mid Clamp For Solar Panel

LARGE Solar Panel Mid Clamps are made of strength extrusion aluminum alloy 6005-T5 ,which can be used for solar panel installation with the thickness 25~50mm of solar modules. It is pre-assembled by different length of SUS304 screws and aluminum D module nuts to meet your solar panel's requirement.